PrimeLynx Constructions

What it covers

General civil scope across new build and existing sites, coordinated with structural, MEP and finishing trades under one programme.

What you get

• Site setup, setting out and temporary works
• Coordinated civil execution across trades
• Progress, quality and QA/QC records

What it covers

Structures delivered from foundation to enclosure, with a single programme, one site management team and a defined quality regime.

What you get

• Substructure and superstructure execution
• Envelope, blockwork and enclosure works
• Programme, cost and quality control

What it covers

Site preparation, bulk excavation, shoring, backfill and compaction carried out to geotechnical requirement and safety plan.

What you get

• Bulk and detail excavation
• Shoring, dewatering and slope protection
• Backfill and compaction testing

What it covers

Formwork, reinforcement and concrete placement for structural elements and ground-bearing floor slabs, with the testing, curing and inspection regime the design demands.

What you get

• Formwork and reinforcement installation
• Structural concrete placing, curing and finishing
• Floor slabs and screeds laid to level, trowelled or power-floated
• Cube testing and inspection records

What it covers

Lightweight cellular concrete placed where load has to stay low — roof screeds laid to falls, thermal insulation layers and void or trench filling.

What you get

• Lightweight roof screeds laid to drainage falls
• Thermal insulation and level make-up layers
• Void and trench filling with density control

What it covers

Access roads, hardstanding, drainage, kerbs and site utilities built as the external framework that makes a facility usable.

What you get

• Sub-base, base and asphalt works
• Drainage, kerbing and surface water routes
• External utility trenching and ducting

What it covers

Closed-cell polyurethane foam sprayed as one seamless layer that waterproofs and insulates in the same pass — suited to roofs, tanks and irregular surfaces where joints are the usual point of failure.

What you get

• Substrate cleaning, repair and priming
• Seamless PU foam spray to specified thickness
• UV-protective top coat over the foam
• Thickness checks and water flood testing

What it covers

Fast-curing, spray-applied polyurea forming an elastic, seamless and chemical-resistant membrane for roofs, podiums, tanks and surfaces exposed to traffic or weather.

What you get

• Surface preparation and primer application
• Spray-applied polyurea membrane to specified thickness
• Detailing at joints, drains, upstands and penetrations
• Thickness readings and adhesion checks

What it covers

Torch-applied modified bitumen membranes laid with sealed, overlapped joints on roofs, foundations, basements and wet areas — the established system for protection above and below ground.

What you get

• Primer application on the prepared substrate
• Single- or double-layer membrane with sealed laps
• Upstand, corner and drain detailing
• Flood testing and protection layer over the membrane

What it covers

Flexible PVC sheet membranes, heat-welded at every seam, for roofs, basements, tunnels and water-retaining structures that need a durable, root- and chemical-resistant barrier.

What you get

• Membrane layout with protection and separation layers
• Hot-air welded seams and edge detailing
• Seam testing before the membrane is covered

What it covers

EPDM rubber membranes that stay flexible through heat, UV exposure and structural movement — used on roofs, ponds, water features and landscaped podiums.

What you get

• Substrate preparation and membrane layout
• Fully bonded or loose-laid EPDM installation
• Seam taping, flashing and penetration detailing

What it covers

Seamless epoxy floor and coating systems for car parks, warehouses, factories, kitchens and clinics — resistant to wear, oil, chemicals and cleaning, and marked out for how the floor is used.

What you get

• Concrete grinding, crack repair and priming
• Self-levelling or roller-applied epoxy systems
• Anti-slip finishes for ramps and wet areas
• Parking bay, lane and directional line marking

What it covers

Water-based acrylic paints and elastomeric acrylic coatings for external walls and roofs — breathable, UV-stable and flexible enough to bridge hairline cracks.

What you get

• Surface cleaning, crack filling and priming
• Acrylic and elastomeric coats to specification
• Reflective top coats for roofs and waterproofing layers

What it covers

Shell-and-core spaces converted into occupied environments, with partitions, ceilings, finishes and services coordinated to one programme.

What you get

• Partition, ceiling and joinery installation
• Finishes, fixtures and fittings
• MEP coordination within the fit-out scope

What it covers

Workplace and retail environments built to brand and layout requirements, delivered around occupied-building and landlord constraints.

What you get

• Layout implementation to approved drawings
• Workplace, retail and reception build
• Phased delivery in occupied buildings

What it covers

Drywall partitions, bulkheads and suspended ceilings installed level, aligned and coordinated with services above.

What you get

• Drywall partitions and bulkheads
• Suspended and gypsum board ceilings
• Access panel and service coordination

What it covers

Floor systems installed on prepared substrates — tiling, vinyl, carpet and raised access floors laid to level and tolerance.

What you get

• Substrate preparation and levelling
• Tile, vinyl, carpet and raised floor installation
• Skirting, transition and sealing details

What it covers

Surface preparation and coating systems applied to specification, including the snagging pass that decides how the work is judged.

What you get

• Surface preparation and primer application
• Decorative and protective coating systems
• Snagging and defect rectification

What it covers

Water supply, sanitary and drainage systems installed and tested, from risers and manifolds through to fixture connection.

What you get

• Water supply and hot water distribution
• Soil, waste and rainwater drainage
• Pressure testing and fixture commissioning

What it covers

Existing buildings upgraded, reconfigured or repaired, with works sequenced around occupancy, access and live services.

What you get

• Condition survey and scope definition
• Strip-out, structural repair and rebuild
• Phased works around live operations